Subject: Turbo II Rotor Housings
From: ACRE
Date: 4/14/2003, 9:18 AM

james coffman wrote:

I have a 91 Turbo II engine.  The rotor housings are
bad.  I bought a set of good 88 Turbo II housings but
there is a difference that I have not heard of.  One
of the 91 housings is drilled for the turbo water
supply, the 88 is not due to that year turbo not being
water cooled. No problem drilling a hole to the water
jacket except the water chamber in the 88's are
straight through to the steel housings on either side.
 The 91's have a block so the water dosen't flow thru.
 Would this be to divert the water thru the turbo.  Do
I need to block the chamber with epoxy to emulate the
91 housings.  Can anyone help me out here?  Thanks Jim
coffman


Sounds like the right idea to simulate the 91 housings.
I am not sure I would do it with epoxy however.
My 88 turbo engine had the turbo water cooled and the aft rotor housing
is drilled. Are you sure you have 88 turbo rotor housings.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.