Phillip wrote:
A friend of mine is toying with twin 13b's in a ski boat. He'd like to keep one
drive and prop (jet pump I think). How can you couple two engines like this so if
one goes belly-up, the other is still operating? He wants to turbocharge both
engines...ya!
I'd like to do the same in a coaxial helicopter "project" we have going on paper.
Paul Lamar responded:
You need one way or free wheeling clutches. One engine quits the other will still
provide power.
Another option is a mixing gear train (PSRU). As an example (not necessarily
appropriate to this application), consider a PSRU where one engine turns the sun
gear, another turns the ring gear, and the prop is driven from the planet carrier.
In the helicopter application, you would probably still need some kind of Sprage to
prevent the running engine from sending some power into turning the failed engine
backwards. On the ski boat, if you lose an engine, you reduce power and go home.
Russell Kent
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.