Subject: Twin 13b's, one prop
From: ACRE
Date: 4/14/2003, 3:26 PM


phillip wrote:

It's pretty simple. I guess described as one ring and two pinion gears.
I left out bearings and seals. I'm not an artist. :)

Thanks Paul

Phil


Sure something like that will work. The devil is in the details of course.

Paul Lamar

Prop load om power boats is very similar to aircraft - ie speed
and rpm are roughly cubic functions. on single engine operation
both rpm and speed would drop to about 80 percent of top
since you will be overproped for the single ongine and it will
also be lugged down on the power curve limiting it's
max power output.  Many power boats are going to counter rotating
props - using each engine for each rotation (like the South American
canard installation) will let the remaining engine develop full HP - Vance

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.