Paul, the stock injectors I have do not fit into the holes provided in the runners. Are the
intended injectors somehow a different size or are we to ream these out before using?
...Chrissi

You must remove the little plastic caps and a collar
on the end of the injector.

How is sealing accomplished?
...Chrissi

A small O ring that just fits inside the outer bore. .35 ID .63 OD
A 1/8 section size would probably work.

Paul Lamar 
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.