Subject: strange engine accessory at Sun N Fun
From: ACRE
Date: 4/14/2003, 6:55 AM


Bill wrote:

Doesn't look like the front engine mount would be rigid in space, only two
tubes.

Paul Lamar responded:

Correct Bill. No lateral support.

Two??  There's only one.  The horizontal tube (which you are considering the 2nd
tube) only connects to the rear motor mount.  There's no load on that tube, as
the engine itself will keep the two motor mounts a fixed distance apart.

Lets see, that's:

  1. poorly supported engine mounts,
  2. unsupported belt drive off the crankshaft, and
  3. electric driven blower (actually electric driven *any* accessory)

I believe we have a Trifecta!  :-)

Russell Kent

The engine cannot keep the steel rings a fixed distance apart because
of the rubber bushings. The steel ring around the rear rubber bushing
transfers the axial load to the horizontal tube in bending therefor 
the steel ring  must necessarily  be thick and heavy.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.

SunFunBlownHonda.jpg