Royce, Sorry but I have worked in aerospace and high vacuum areas. The company I currently work
for does metal and oxide sputtering. I have yet to see my first anodized ICE engine bore or
piston. I really wish you well, and hope it works, but I have NEVER seen one. Don't think you are
the first to go down that road either, since several major mfgrs. have spent millions developing
coatings, and these guys know aluminum oxide is hard. Hard anodize is usually done to 6061. 7075
can be anodized yes, but blotchiness is common. You most commonly see hard anodize used on
hydraulic cylinders or shaft seal surfaces. These surfaces don't have to deal with the byproducts
of combustion.
I really want you to know that if it works I'll be the first to congratulate you. But sometimes
the problems that arise are unanticipated. As an example many years ago I was in the motorcycle
racing world and everybody was looking for a way to make lighter disk brakes. Cermet coatings were
available, and carbon brakes were 10 years away. Some guys invested in 7075 disks that were cermet
plasma sprayed. The coating was quite strong and held up well in the first tests. The problem was
that when the fastest riders ran the brakes the cermet coating worked great, but the 7075 aluminum
substrate couldn't radiate the heat. It didn't melt but the pressure of the pads caused the
aluminum to cold flow. Kinda like a ice cream sandwich on a hot day. It squished out a little! The
coating then flaked and the rest was ugly.
I hope that we can find a method that works. I don't care who invents it. Be sure to test for
cracking flaking and peel whatever is used since there is no small mistake here. Really wishing
you the best luck Bill Jepson
IMHO one of the reasons that wear coatings and platings on aluminum are so problematic is
the fact that aluminum loses half its strength at 500 F. If you over heat one
tiny spot on the cylinder or the housing the bond between coating or plating can
be attrited greatly.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.