Subject: Aluminum end housings and turbo, NA rotors.
From: ACRE
Date: 4/16/2003, 1:48 PM


John Gibbons wrote:

Paul and all,

    If I remember correctly Rotax use aluminum cylinders in their 912
engine, and they nitride the walls. I have seen cylinders with 3600
hours on
them and the still show the honing marks.

    To Toms question on the rotors, aren't the NA rotors higher
compression
than the turbo ones ?

John

Nitriding is a process does on steel cylinders. Are you sure they are not
cast in
steel liners.

Paul Lamar

Paul,

    Well I did say "if I remember correctly" and memory is a brain function
(seemingly fading fast at times). This is the reply I got back from my query
to an engineer buddy who is a lot smarter than me.

Hi John
The cylinders are made of Nicosil and are very hard. They have an advantage
of being repairable but I dont know of anyone who has done it.
The cylinder consists of steel and nickel combine to give wear and
durability.
The head is made of alluminium and fits on the cylinder with no gasket or
seal.
Hope this answers your question
See you later
Regards
Pierre

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.