Subject: Aluminum end housings
From: ACRE
Date: 4/16/2003, 1:50 PM


Are you sure they are not chrome plated? Are they shinny?
The teflon coating has been used for quite some time over the chrome
to enhance
the break in period and improve the initial emissions and fuel
consumption. It soon wears away. The steel inserts used
have a serrated surface that was partially rolled over causing
it to lock with the aluminum die casting. Is that what you are
referring too? If not do you have any pictures?


Hmmm, I don't really know if there is chrome under the teflon, they
are
definitely not shiny.  I plan to take apart the last six port I put
together and convert it to a hybrid 6-port/peripheral port for some
dyno testing.  I'll see if there is chrome under the teflon then I
suppose.

The steel inserts look like square mesh to me Paul.

Hans

Hans, is this your idea of an April Fools joke? :) If so you are a bit
late.
I called Mazdatrix and a brand new rotor housing looks just like it
has always
looked for the past 30 years. Namely chrome over steel.

The last two pair I got from Mazda were a dull grey teflon color on the
wear surface.

Hans

That is probably before the teflon wears off. How long has it been since you
ordered new rotor housings before this?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.