A> ddunbar wrote:

Hello Paul,
I have just finished my radiator of which the core was made in South
Australia by a company called ADRAD PTY LTD. This is a two row core
with 27 water passages in each, the tube size is 25 [1"] x 1mm.
Core size is 460 [18"] x 325 [13"] plus the end tanks.
The core cost me $410 Aus or $250 US plus the cost of the end tanks.



--
Best regards,
 ddunbar                          mailto:ddunbar@echidna.id.au

A> That is a pretty good price. Where and how are you going to mount it?
A> That is the hard part :)  (That's Don's 98 3rd gen in the background.)

A> BTW if you use only one runner for the two center intake ports you should make
A> it half as long as it pulses twice as often.

A> Paul Lamar

Hi Paul,
I will mount the radiator under the engine as per our original
discussions.

--
Best regards,
 ddunbar                            mailto:ddunbar@echidna.id.au

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.