Subject: Aluminum end housings
From: ACRE
Date: 4/18/2003, 6:51 AM


An embedded through hardened steel insert on the other hand
can be reground at low cost by an ordinary grinding wheel.

Paul Lamar


********************************************************************************

Paul,........I highly recommend the surface be Blanchard Ground with the
appropriate grit Brick instead of Surface ground, then lightly lapped. This
would provide a much better finished surface........Incidentally Blanchard
grinding is a cheaper and faster production operation than Surface grinding.

                                                        Butch

Thanks Butch. The boss already suggested it.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.