Subject: Grumman AA-1B - exhibition category
From: ACRE
Date: 4/23/2003, 9:19 PM


Also, the lead weight you will need in the tailcone to get the W&B back
into
the range will add to the unrecoverable spin problem. I think this
particular
design does not lend itself to this Mod. Although by making a major
airframe
modification to a stock airplane, it may help qualify for the 51% rule.
Perhaps extending the fuselage a foot or more would cure the balance
problem
and increase the rudder and elevator authority at the same time, curing
two
problems.
Lynn E. Hanover

Good point on the lead. Nothing like a higher polar moment of inertia
to aggravate that problem.

Paul Lamar

Lynn,
With my vision project- by the way do any of you guys know the designer
Steve Rahm a great bloke!!
I had a chance to meet him while I was in the US and I'm hoping he warms to
the Rotary as an alternate engine choice.
The Vision design is for a max engine weight of 300lbs - I figure a weight
in the tail will solve any excess engine weight.  However a certain person
( to remain unnamed) informs me that this causes the aircraft to 'wallow'
(up and down) in flight. I can't understand this, if the control surfaces
are adequate.
Any opinions or suggestions on this.
George (down under)

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.