Joseph Berki wrote:

Hi,
        The 13B  comes apart just like Bruce's video describes.  I bolted a piece
of angle iron the the flywheel  (stick) and broke the front hub bolt
loose.  The flywheel nut will not budge.  Used a 1/2" breaker bar and a 4'
extension with no luck.  Tried a small impact wrench at 80 psi, just
noise.  Any tricks of the trade?  Thanks for any help.

Joe Berki
Limo EZ
motor mount

1/2 inch breaker bar is not big enough. You need a 3/4 with a four foot arm.
Or a large 3/4 impact wrench.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.