Subject: Scrap Turbo Housings Wanted
From: ACRE
Date: 4/26/2003, 9:51 PM


I am looking for three scrap/junk turbo housings.  Condition is
unimportant as
long as the exhaust inserts are in good shape.  If anybody has any of
these or
can steer me to someone who does, please contact me at
msteitle@mail.utexas.edu.
Thanks,
Mark S.

BTW Mark, thank your father in law for that head light sanding tip.
Worked like
a charm. I can see clearly now.

Paul Lamar

Paul,
Will do.  I have a dull headlight on my MK VII that needs refurbishing.

As I had said, Mazda Trix suggested two methods of removing the roll pins that
hold the exhaust inserts in the housings.  Either tap the roll pin with a 6-32
tap, or weld a rod to the roll pin, and then use a slide hammer to remove the
pin.  I tried method #1 today and it worked great.  You just need to be
careful not to break the tap off in the hole.  :-(  A slight tap and out comes
the insert.

Enjoyed the visit.
Thanks,
Mark S.

P.S.  The in-laws and I vistied the Nethercutt Museum and it was really
great.  What a neat place.  The wife especially liked the very unique musical
instruments.  Their vast automotive library has both the Yamaguchi books.  The
librarian offered to make copies of anything I wanted.  I would highly
recommend it to anyone in the S. Calif. area.

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.