Marc Wiese wrote:

Subject: Re: (rx7) in new engine break

Some of the Japanese engine builders are using a spray-on "coating"
which
effectively allows enough sealing to start a new motor right up.
Naturally
it rubs off eventually and is apparently not harmful to the engine in
any
way.   FEED's site, I believe, shows this.   (www.pac-gate.co.jp/feed)

On another note, do combustion chamber pressures help the apex seals do
their
job or do they simply rely on spring pressure for sealing?   Piston
engines
do have a fine hone (much more so than 10 or 20 years ago) to the
cylinder
wall which is worn away in the first few miles of usage.   Some theorize
that
breaking in a piston engine "hard" produces better ring to cylinder seal
and
a motor which will produce more hp than a "lazily" broken in motor.
This
theory is pretty popular in the sportbike community presently.

Since there is no "hone" on the housings, is there anything really being
worn
away or is it a matter of seals "settling"?   Specifically the apex
seals.
It would seem the side seals go through something similar to piston
rings on new or lapped housings?<<<

Marc Wiese

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.