Here is a rendering of the complete turbo intake system. Combining the plenum
with the intercooler reduces the pressure drop throughout the system
and consequently reduces the exhaust back pressure on the engine for
a given amount of boost. It also eliminates a couple of hose connections.
Paul Lamar
********************************************************************************
PAUL!!!!!.......That is real nice, If it works half as good as it looks you'll
be "Boogyiiiiing" ;)
All you need to do is finnish that slippery airplane of yours, slap this
powerplant on, outfit it with the LAEV Prop, loose a few personal pounds and
you'll be "Kicking some SERIOUS A--ES" out there :)
Paul, GO FOR IT!!!!......Speed is right up your alley.......Spend some of that
money you have in mothballs, you can't take it with you when you bite the dust
anyway. If I were you I'd hire a couple of unemployed goo-goo guys full time,
and be in the air in a matter of months instead of eternity, then spruce-up &
sell that Money Pit Bucket you're flying around in.
Do it NOW, don't wait till you can't physically do it......Take this as very
good personal advice from a guy whose been in a death bed in younger years and
hasn't deprived himself and his significant other of ANYTHING since then.
Butch
Robin is worried about her old age as she is 12 years younger than me :)
Right now I am trying to help other people get their airplanes finished.
As soon as I build up an inventory of manifolds, tube bends, water pumps
and injector runners I'll get back on the dyno, my own engine and airplane.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.