Joseph Berki wrote:

Hi,
        When using the Schertz beam, in my case at the

front of the motor,  is it

necessary to fab a custom oil pan or do you use washers or

shims to take up

the space between the rib on the outer edge of the stock

pan and the bolt

area?  Thanks for any help.

Joe Berki
Limo EZ
motor mount and ducts

I think you can grind it off as the Schertz beam will provide
plenty of
uniform clamping pressure on the oil pan flange.
--
Paul Lamar

When I was considering the S. beam I was going to put the pan on an anvil and just beat the rib flat.

Ken Powell

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.