Joseph Berki wrote:

Hi,
        When using the Schertz beam, in my case at the front of the motor,  is it
necessary to fab a custom oil pan or do you use washers or shims to take up
the space between the rib on the outer edge of the stock pan and the bolt
area?  Thanks for any help.

Joe Berki
Limo EZ
motor mount and ducts

I think you can grind it off as the Schertz beam will provide plenty of
uniform clamping pressure on the oil pan flange.
-- 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.