Subject: Aluminum end housings status.
From: ACRE
Date: 5/2/2003, 11:10 PM


Just came away from a meeting with the aluminum end housing coalition.
IE. Foundry.. machine shop.. pattern maker.
They have come up with a very VERY good way of positively locking the
through
hardened steel wear surfaces into the aluminum castings. We are
all very excited about the prospect of a 150 pound rotary engine
putting out 250 HP and doing it with no fuel burn penalty.
Now if I can get 15 pounds out of a 3:1 gear box we
will have one heck of an aircraft engine.

Paul Lamar


Ya know... a 400 hp three rotor Harmon Rocket or F1 Rocket would kick so
many butts it would be just silly      P-)
MGM

Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode

Why stop at 400 HP? A 900 HP three rotor has been done on the dyno. Would work
great in a Nemesis Next for Reno or most other 100 mile cross country air
racing.
I think it would beat most small single engine turbines airplanes in a
1000 to
1500 mile race simply because it would not have to stop for fuel and it would
generate way more power up high.

Two out of the four end housings are aluminum in this RB engine pictured
below.

There also is that sprint car water pump I mentioned in a few messages back.

Paul Lamar

Yep we're gonna be giving the small turbine crowd something to think about
pretty soon.

It's the airframes I'm thinking of.  A special unit like the Nemesis or
even a Lancair designed for high speed is one thing.  With the Rockets,
still using that 23013.5 airfoil, even with the wings clipped, the thought
of pushing 300 mph starts making the hair stand up on the back of my
neck.  You'd have to start re-engineering the wing structure or start
changing airfoils or both.  The tail is the other lynchpin.  Even with our
13B's,  we're building engines that might start stretching the limits of
our planes.  The 20B's in the stock RV-8 will deserve a conservative
throttle hand at low altitudes.

But I digress, re the 400 hp, yeah that's conservative but you don't want
to scare the competition away.  Every time the folks running Lycomings get
caught up we just have to squeeze ours a little harder.   P-)    And we'd
have a looong way to go  8-) (as the hair stands up on the back of your
neck while you're looking at the wrong side of Vne)   8-o

Okay, after that epistle I obviously need another beer...

Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode

The Lancair Legacy is another potential airframe for high speed.
Darryl Greenameyer went 276 knots or about 318 MPH in the Sun 100 race.
Here is a pic. Note the bulges on the cowl to accommodate the twin
turbo IO-550.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.