Subject: Aluminum end housings - CG
From: ACRE
Date: 5/3/2003, 7:29 AM


Brian,
  Your RV-4 motor mount appears to be quite a bit longer than mine; I think (it's been
  awhile) that my engine/redrive CG is 3 inches further forward than an O-320 (and even
  that makes me a little nervous even though the RV-4 is usually a little tail heavy) and
  your motor mount looks to be quite a bit longer than mine.  Anyway, if these end
  housings become available I will be rebuilding motor mounts while you may be OK.  That's
  40 - 45 pounds that I'll have to allow for when calculating the CG.

  Ken Powell

The difference in weight would be a concern. My prop hub will be 44 inches in front of the
firewall. If the aluminum middle and end housings work out and I go with them, there is a little
lattitude with whether I put the battery in front of the firewall. It sure would be nice to have a
150 lb block.  Right now the weight and power of the 13 b compared to the lycomings is favorable,
just think if weight could be removed from the redrive and e-shaft as well as the end housings.

Brian Trubee

Taking significant weight out of the e-shaft would weaken it.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.