I am using the stock Mazda Nippon denso injectors. Tracy mentioned twenty

gallons an

hour max. Should be good for about 50 HP each.

Paul Lamar

Richard Konnen wrote:

Paul,
    Thanks for the response. You didn't comment if anyone was using a
Megasquirt controller? http://www.bgsoflex.com/megasquirt.html
Also you mentioned the ones you use to be good for about 50HP each, would
that mean if I am shooting for more than a 100HP just go for larger
injectors? I see on a chart I have Bosch makes one used on a Ford at 100HP
each, would it make since to use a large injector and just tune it to the
desired performance?
 Thanks,
    Richard

I am real sorry about that Richard. What a great idea. Build your own fuel 
injection computer. Open source software so you can make your own program 
modifications. Real cheap.  I can see what I will add right away and that 
is data acquisition. This really jump starts anybody that wants to roll
your own. Major major breakthrough.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.