Subject: Failed water pump pulley.
From: ACRE
Date: 5/6/2003, 11:50 PM


Ian, It looks like you have a classic cantilevered load. I am assuming that the pulley sits around
the end of the waterpump housing and the depth allows the v belts to line up with the e-shaft
pulley. Bear with me since my last work on the RX3 was 4 yrs ago. There are several problems here.

First; is our common problem, high continuous operational speed. 

Second; pulley distance from the
bearing. I don't remember if the fan was mounted here in the car. If so the loads would be better
balanced on the front bearing of the water pump. You really need to check the bearing carefully. I
am assuming that the small toothed pulley is used to drive accessories, (vac pump) with a light
load? Lastly; and most important, I would carefully check runout when the pulley is mounted. If
there is any significant runout it would be advisable to shim the pulley into alignment. If the
pulley has runout it moves in an elliptical or egg shaped path. That path causes a tremendous
variance in tension on the belt. The drawn portion of the pulley would then be flexing constantly,
greatly increasing the possibility of failure as you had. When I was working on GP bikes we took a
great deal of time to be sure chain sprockets were round and concentric to the hubs. A very small
runout, about .020 inches would result in a power robbing eccentricity. We saw as much as a 1-2 HP
difference on the rear wheel dyno. We often ordered 3 or 4 sprockets of a given size to get one
good one. That power had to go somewhere. In your case Ian I would say the wasted power heated,
flexed, and finally failed your pulley. Paul has constantly harped on how much power waterpumps
use at WOT, and he is right! They are great HP suckers waterpumps. If you doubt it ask your local
fire dept. how many HP their pumper engine is rated at. Sorry for the long winded post but it
seems important. Bill Jepson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.