Subject: Failed water pump pulley.
From: ACRE
Date: 5/7/2003, 8:54 AM


Ian Beadle wrote:

Hi Gang,
The picture is of my water pump pulley after it failed at 10,000ft.
Kinda spoilt my day! I had
been in the air for 3 hours when the gyro tilted and the alternator
light came on. When the
coolant temperature started skywards I knew I had a problem.
Fortunately
I was close to a country
town with an airstrip complete with windsock.
I have no idea why it failed.   The only thing I can think apart
from it
being damaged in transit
on the engine from Japan is that there are 8 holes in the flange and
pulley and I only have 4
bolts.  Any ideas?

Ian RV6A Australia


Hi Ian,

    Glad to see you got your aircraft and yourself down without futher
incident.  First time I've heard of the water pump pulley failing,
glad you
were close to an airport.  Now, I've got to go out and see how many
bolts I
have holding mine on.

Ed Anderson


Don't forget to check for cracks Ed.


Paul Lamar


When I bought my engine, there were two nicely made double belt
aluminum water pump pulleys  included.  One is the stock diameter and
the other is about .5 inches larger. Both have heavy end flanges that
the bolts go through.     Dead batteries in the camera; I will send
photos later.        Jerry

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.