Subject: 20B dyno test - Torque/ HP
From: ACRE
Date: 5/9/2003, 7:18 PM

Vance wrote:
Al - thanks for some real world data on a well implemented 3 rotor
installation.
Did you get any fuel consumption data, and what is your feeling on the
estimated
firewall fwd weight as compared with  a 540  or 550 - Vance

Al Gietzen wrote:

Fuel consumption data is, unfortunately, very limited.  The fuel flow
meters at the dyno were not working properly, so the bsfc data has a
great deal of scatter.  We did 4 timed runs recording weight of fuel
burned.  This data was recorded on a sheet of paper which got left at
the facility - I'll get it in a few days.  The one data point I have is
for 5000 RPM, very lean (lambda of 1.08).  BSFC was 0.49 lbs/hp-hr.

My FW back (pusher) weight is now at 414 lbs. This includes everything
and is actual for everything except coolant and plumbing lines which are
estimated.  Does not include prop, or auxiliary cooling fan which I
still have hopes of doing without.  I don't know what it is for a 540,
but I'd like to know.

Al

Vance here is the MAP curve you missed.

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.