Dan Ruggirello wrote:
Hey Paul,
For what it's worth here is a quick run of the water pump pulley.
100
lbs at about mid belts
location. 0.025" thick steel. Left off the thick pulley -
modeled it
as rigid.
Dan
Isn't the internet and amazing thing? Thanks Dan.
Paul Lamar
Hey Dan, That's amazing! Sure shows why I need 8 bolts. Thanks.
Ian Eight Bolt Beadle
I would put at least a thick washer on there Ian as well.
Paul Lamar
Dan Ruggirello wrote:
Here is a better comparison. 4 bolts fixed and load in direction of
fixed
bolts. 8 bolts fixed and load same direction. With 8 bolts, the stress
values are reduced by 50%.....
Dan
Dan,
I'm sold. Where can I get a copy of this program? I've been looking for an
affordable FEM package forever. I am willing to learn Spanish just to get be
able to use the program. Combined with Rhino and a good CNC package and you
can do just about anything the big guys do in your garage :-)
Monty
-- > Dan Ruggirello wrote:
Senor Monty,
The FEM package is actually written in english and the one I am using is very costly, in fact way
over priced. The spanish software you are thinking of is the CFD code, an opensource free
program. BTW, the developers told me they translated the manual to english, but I havn't had the
chance to download it to evaluate it.
But, if you are looking for a good inexpensive solid modeler w/ FEM for about $150,
checkout the student edition of Pro/E that comes with Mechanica (the FEM package). I believe you
have to run Pro/E to use Mechanica though. I have not used Mechanica, but I worked with others
that liked it.
I have been using Pro/E for some time now and it installed easily on my computer running Windows
XP, 1Ghz AMD CPU and 512MB RAM. The downside is Pro/E doesn't guarantee it will work with all
graphics cards and CPU combinations and Pro/E has a learning curve if you havn't used parametric
modeling before. It requires a different way of thinking than Rhino and ACAD.
Hasta la vista ;-)
Dan
Dan I can output files from Rhino in Pro/E IGES format if you wish.
Also what is the Pro/E three letter file extension. I might be able
to output files from Rhino in native Pro/E format.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.