Does anyone happen to know the correct p/n for the larger diameter
20B
tension bolt washers. It is the equivalent of the 10-4551 in the
attached
diagram. I'm having a bit of trouble finding the correct Mazda p/n.
I'm glad you guys like Brian. He did me right on parts for rebuilding my
engines and I believe I was the first to lead most of you to him, I had
to, he send me Yagamuchi's book for free!
Attached is the 20B parts diagrams that you need. It might be the
0835-10-455 ? (for the washers)
Also one showing the 20B intake racing manifold. Prices are in yen and
are very old.....don't gasp too hard.
[Marc Wiese]
Paul Lamar
Marc,
I just went through that ordeal just last week. Here's the reply I
received from Brian at Mazdaspeed of Houston. Did I mention he's a great
guy, with good prices too? This p/n is for the large tension bolt washer.
<snip>
Hi Mark,
Mystery has been solved. But they don't have any. They were expecting them
two weeks ago but still have not shown up. There is no ETA at this time.
Here is a part number for future reference. NF01-10-E55A
Hope the old ones are in good a shape as you said.
Regards,
Brian
MAZDASPEED OF HOUSTON
Mazdaformance.com
<snip>
Turns out that mine are good enough to reuse. So, I told him not to
bother. You can reach him at support@mazdaformance.com
Mark S.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.