Subject: Tube in Renesis Intake port]
From: ACRE
Date: 5/14/2003, 10:10 AM

Ed Anderson wrote:

Paul, regarding that tube blowing into the port on the RENESIS engine check out what I colored in
blue:

Three-stage induction system and twin electronic throttles

RENESIS is equipped with a 6PI (six-port induction) variable induction system, featuring three
intake ports for each of the two rotors. The system employs DC motors to open and close shutter
valves at the intake ports of each rotor to utilize the incoming air's dynamic charge effect and
improve filling efficiency. (not quite certain that explains anything {:>)

In addition, the RX-8's RENESIS also features twin electronic throttles that convert throttle
input to an electronic signal for more accurate and responsive valve control. Finally, the newly
adopted resin intake manifold is lighter and is designed to have superb laminar air flow
minimizing air resistance and intake losses.


Also article attributed the better fuel economy to these features:

Finer fuel atomization, powerful ignition and advanced engine management

The RENESIS engine features ultra-fine fuel injectors for improved fuel atomization. Small,
high-power coils provide a more powerful spark for enhanced ignition. The combination of
ultra-fine injectors and powerful ignition results in virtually complete combustion, which
directly translates into higher fuel efficiency and lower emissions. An advanced engine management
system provides even more precise control than the conventional oxygen-sensor feedback system.

Double-skin exhaust manifold for enhanced catalyst activation
Ed Anderson
Matthews, NC
RV-6A N494BW
eanderson@carolina.rr.com


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.