Marc Wiese wrote:
Subject: 20b exhaust manifold-HKS type
Sorry for the late reply as I am moving to 5TX0, an airpark near
Dallas
TX. However, I will have to build a hangar-but at least I have
room
and
a runway. I may be moved in by late April. Till then, I can't get
to
my
STUFF as it is all packed away. From memory, I can tell you HKS
made
the
ss turbo for 20Bs raced overseas. The Wastegate line is pointed
in
the
wrong direction for our uses (toward prop), but so are the ones
on
all
the TIIs so it is not a big deal. Standard aircraft wastegates
will
bolt
up to it. Turbo lange faces up/out at an angle, but the clearance
to
the
oem intake is an issue...but maybe not to the new casting done by
Tom
Kendall. I will have to see....
Here's a couple pics. There may be more info in the archive.
[Marc Wiese]
This question is for Marc.
Where did you get your exhaust manifold?
Or, how can I get in contact with HKS?
Thanks
Chris C.
microcosman.com/aircraft
I think you can get them from most specialty shops that source HKS
parts. I got mine from a racer supply in Ohio, not Summit, but one that
specialized in Japanese racer parts. I will try and find the
receipt...[Marc Wiese]
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.