Subject: 6000 RPM dynamic chamber.
From: ACRE
Date: 5/18/2003, 9:35 PM

I had the bright idea of seeing if a dynamic chamber tuned for
6000 RPM rather than 3000 RPM was possible. And here is
what Rhino came up with. You will probably need two
throttle bodies. One for each runner.  
Not shown in the 3D but they feed  into
the center of the runners. If you are pressed 
for space and weight this might be worth a try.
Its all theory. The distance between the outer side ports
precludes designing it for even higher RPM.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.