Subject: New info on the RX8 engine.
From: ACRE
Date: 5/18/2003, 11:45 PM


Apparently Mazda totally redid the casting patterns on the end housings


Paul, The thing I noticed about the new end housings is that long tube that sticks in! something
very interesting is that they have contoured the port. the opening on the ram tube faces up and
out. I would be willing to bet they have tried rotating these tubes to close/open them for
variable timing. Bill Jepson

They have doing that for years on the six port. Nothing new there.
The big difference is the ports are much larger than in years gone by so
the end housings are much thicker in that area. they claim they have improved
the casting technique so they can go to thinner walls. Lets hope so
as I would not want them to be heavier than the old ones.

Here are two pictures one of the old six port and one of the
new RX8 six port castings.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.