Subject: temperature rise in the intake charge
From: ACRE
Date: 5/18/2003, 6:50 AM

david mccandless wrote:

Hi Y'all, a question for the turbo crowd, is there a thumb rule for
temperature rise in the intake charge related to boost pressure? eg,
does 5 psi of boost in MAP above ambient cause a temp rise of 10deg F in
the intake charge? I'm trying to determine at what point does an
intercooler become necessary to stay below 140F and thereby avoid
detonation.I am aware of the gas laws in physics but there are many
variables in a turbo system. I'm looking at the single rotor application
as the new lightweight end housings open more possibilities
And Paul, I think maybe a small rack and pinion system, 4 racks and 4
pinions all on the same axle on those intake runners might help keep
them at equal length. Still how critical is it that they all be exactly
the same length; each port would probably have its own exact tuned
length anyway, all within a few mm. I am impressed with the annular hyd
cyl idea; ref Bill J's comment, whats wrong with a larger plenum? I'm
following it all with great interest. Cya, Dave McC


Find yourself a copy of HP Books "Turbochargers" by Hugh MacInnes.
The formulas are quite complicated. Particularly when it comes to
turbo charged aircraft engines at altitude.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.