Subject: 13B Water Pump Housing
From: ACRE
Date: 5/20/2003, 5:56 AM


Mark Steitle wrote:

Before going to the wrecking yards, I though I would check here on the
ACRE.  What I'm needing is a water pump housing for a 13B.  I have
one, but
it has cavitation pits in the impeller area and I don't want to use
it.  Anybody have one of these they're not planning on using?  Contact me
directly at msteitle@mail.utexas.edu

Thanks,
Mark S.

Don't have any stock ones to spare Mark but the new remote mount units are
in the machine shop. Should be done any day.

Paul Lamar


Paul,  What will the price be for the remote water pump?  I'm
interested so put me down on the
list for one.  I'll let you know for sure once I know the
price.  Thanks for all your work.  Have
a great day.  T.W.

Not sure yet. It will be completely machined with all the holes drilled.
Still in the machine shop. Might know later this week.

Paul Lamar

Paul,
I like the Lamar pump, but I'm not sure that's the best route to go for
me.  I have the ample room under the cowl for the stock pump and I was
planning on putting a second alternator on the plug side of the engine.  I
was contemplating switching to the 13B housing to trim a couple of pounds
from the fwf weight.  Do you know if there is any difference in the n/a 13b
water pump housing and the turbo housing?  The reason I ask is that the
impeller on my 20B pump is .150" larger dia. than the n/a 13b pump
impeller, but same height.  Does the 13B turbo use the larger impeller or
the same impeller as the n/a engines?   It looks like the two impellers
could be swapped if necessary.

Mark S.

They are not for everybody. If you have the room you don't need it.

That larger impeller is the first I have heard that had a different diameter.
That could be a real problem down the road when you might need a new cartridge.

I have seen subtle differences in the cartridges however. Different shaped
impellers and different volumes of cavities around the impeller over the years.

They all seem to be interchangeably. I would love to see info from
Mazda engineering on what things they have tried and what changes were 
made and why. I know the 3rd gen pumps are bought from Kaboto Tractor. 
 
Tell me if you see something that looks like your pump.

Also please take some pictures of your pump and send them to me.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.