Max & Mae Dell Calkin wrote:

    The one I have off a 1990 RX weighs 4 lbs. & 2 oz.
Just finished rebuilding the engine and noticed that the
flex plate is cracked about 3/4 the way around. Have a
new one on order.   Max Calkin mlcalkin@omahaweb.net

George Lendich wrote:

Paul,
Can you tell me the weight of the Auto flywheel, I'm looking at making

an aluminium one the same

size of the manual flywheel, to get around the bellhousing diameter

problems.

George (down under)

Sorry don't have one here in the office. The only one I have is
60 miles away in the hangar on the engine. Anybody got an auto TX
flex plate lying around?

Paul Lamar

Max & Mae Dell Calkin wrote:

    The one I have off a 1990 RX weighs 4 lbs. & 2 oz.
Just finished rebuilding the engine and noticed that the
flex plate is cracked about 3/4 the way around. Have a
new one on order.   Max Calkin mlcalkin@omahaweb.net

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.