Mark Steitle wrote:

Paul,
This is addressed to Bruce Turrentine, or someone who knows, provide me
with the correct torque spec is for the 12mm tension bolts.  The 20B uses
both 10mm and 12mm bolts.  The 10mm bolt torque is given in my RX-7 manual,
but since these aren't used on the 13B engines, there is no listing for the
larger bolts.

Thanks,
Mark S.

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.