RotaryResources@aol.com wrote:

What about the torque on the 20B bolts Bruce ? :)

~28 ft-lbs for the 10mm
~35 ft-lbs for the 12mm  (too much and the sealing washers will crack)
Front hub nut. 300 ft-lbs to seat the front lobe, then 125 to 150 depending on thrust bearing
endplay with blue lock-tite
Bruce

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.