Ernesto Sanchez wrote:

A little off topic but useful.
Ernesto

Hi, gang,
I gleaned the messages below from the excellent Aeroelectric list.  Jon

has offered to coordinate a group-buy for the circuit board for Cliff Cady's
altitude hold unit.  The details are below.  I thought others here might be
interested in jumping on the bandwagon.  If so, contact Jon directly at his
email, posted below.

-Howard Rogers

_____________________________________________________

Hi Howard,

You bet, the more the merrier.  The board count is up to about 20 now.

Tell whoever is interested to shoot me an email with the number of boards
they want by Sunday the 25th.  I will send out a confirmation note on the
26th and hope to order the boards later that week.

Jon

Hi all,

I am interesting in building (attempting to build!!) one of Cliff Cady's

Altitude hold units (http://members.aol.com/ccady/eztrim.htm).  The minimum
order for these boards from ExpressPCB is 2 (~$45 per board). I'm wondering
if there is enough interest to order a batch of 10 or so (~$14 per board).

If interested, please send me a message offline (jon@finleyweb.net)

indicating the number of boards you'd like.  If enough interest is shown I
will privately contact each of you and get a firm commitment.

Thanks,

Jon Finley

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.