Ernesto Sanchez wrote:

Will a front cover from a 12a fit the front of a 3rd gen 13b-re?
Ernesto

Good question. There may be one bolt difference. I don't really know
as I have never tried it. I would be rather surprised if it did
as there are 20 years between them and a lot of the accessories on
the front of the engine have changed.

If it works it is a good way to get
oil into the engine as the old distributor hole can be used
to fill the engine with oil :) One problem would be mounting
the third gen crank angle sensors which sense off the e-shaft.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.