Subject: Another oil injection failure mode.
From: ACRE
Date: 5/24/2003, 9:36 PM


Chrissi, if you decide to use the third gen electronic stepper motor
oil injection pump how are you going to control it without
the stock computer?

Paul Lamar

Selective listening.. I mentioned in an earlier post on this subject that I have a 1st or 2nd gen
front cover (for the add'l mount feature) and I have the 2nd gen mech oil metering pump with the
oil pickup bypass kit installed, Bruce modified the pump to give only two oil lines out. I was not
even aware that air lines also had to be hooked up to the injectors. Bruce's instructions were to
run at least a tank with premix while figuring out the injector pump setup.
...Chrissi

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.