ddunbar wrote:

Hello Paul,
I am looking at all the alternative for where to mount the radiator.
What was the required distance behind the radiator that your test came
up with.


--
Best regards,
 ddunbar                          mailto:ddunbar@echidna.id.au

50% of the maximum dimension of the rad. If the rad is 24 inches
the back side should be straight for 12 inches before any curves
in the duct are attempted.

Best to mount it underneath the engine. Come in with the air on top of
the rad and let it out the unobstructed bottom.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.