Subject: Calculating the speed of sound in intake pipes.
From: ACRE
Date: 5/27/2003, 5:17 AM

You need to know what it is to calculate the tuned length of your intake pipes.

The speed of sound mentioned in Scientific Design of Intake and Exhaust 
Systems the exhaust  part of the book was somewhere between 1300 and 1700 FPS
obviously that was for hot exhaust gas. Intake pipe speed of 
sound will be slower.

The best thing is to determine the pipe length by experiment
and that is exactly what Mazda did with the Lemans engine.
That automatically accounts for the actual speed of sound
in the pipe.

The Lemans Mazda SAE paper is the best as it shows the torque 
curve for each pipe length. Here is the chart along with a drawing.
The numbers shown are in addition to the static section
so 175 mm gives an overall length of about double that and then
some. My guess is 380 mm or about 14 inches for 6000 RPM.

The torque curve shown for the fixed pipe length at 6000 RPM 
is rather peaked so the BSFC would not be too good at 4500
to 5500 RPM cruise. Might be better to make it variable
so it can be lengthened for cruise and better BSFC.

Now the question is; would a fixed dynamic chamber of total
pipe length of 14 inches port to port give a broader
torque curve? I suspect it would but perhaps less
peak power.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.