-- Brett & Tiana Campbell wrote:
As I mentioned earlier, the engine weight sans fan/starter &
magneto
assembly, clutch, carb, and muffler is 35 lbs. Completely assembled
weight
with all above components (except for the clutch, which wouldn't be
required
on an ultralight) is 67 lbs. This means that a belt-driven 2:1
ratio redrive
would double the torque to 40.6 lb-ft, and provide a total
(estimated) F/F
weight including prop and mount of a little over 100 lbs.
"Kevin R. Walsh" wrote:
It would be reasonable to ditch the fan as long as the prop was
providing the same or more airflow. The starter could be ditched if
you wanted to hand prop your ultralight. Air restart would be nice,
but most ultralights are pretty good gliders, and you ought not be
flying an ultralight low and slow without keeing a landing in mind at
all times anyway. Clutch goes in the trash. Magneto goes in the trash
if you go to electronic ignition and a battery. Muffler and Carb stay.
Now add the weight of a 2:1 drive, probably a belt, and you are
probably in the 60-70 pound range. An ultralight is limited to 254
pounds, and taking up 100 of that with an engine would be fairly
extreme, I'd say. I always thought the sachs and OMC rotaries would
make great ultralight motorglider poweplants myself.
Kevin
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.