Archie wrote:

These can be made for peanuts if using conventional injectors.
I made 16 for a friend doing experimental work on an engine.
Took about an hour to make them all on a manual lathe..
Only need a lathe and a special injector core drill from MSD (approx $100.)
If setup on a bar feed CNC, could make about two a minute.
Archie

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.