Joseph M Berki wrote:

Paul,
        The radiator which I need to have built is 24" X 12" and will sit next to
a stock Mazda oil cooler.  They will be mounted in a tray under the main
spar at an angle downward.  A P51 scoop feeds this whit the inlet under
the main gear.  The aft end of the rad/cooler line up just behind the fron
of the motor looking at it from the side.

Joe

OK I will draw it into the 3D.
Perry mentioned your engine looked a bit too far aft. How far is it
from the e-shaft pulley to the firewall.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.