History of the invention of the rotary engine by Julian Marsh 1588 Ramelli, an Italian engineer invented a water pump which continues to be used in oil pumps and compressors. 1636 Pappenheim, a German engineer invented the gear pump which is still used to lubricate engines. This gear pump made it possible to dispense with the reciprocating slide valves used by Ramelli. [Fig 3] Pappenheim drove his machine by an overshot water wheel set in motion by a stream and was used to feedwater fountains. The emperor Ferdinand II granted him a ?privilege? - the equivalent of a patent in respect of this invention. Even in the 17th century, engineers were trying to solve the problem of ?leak-proofing? between moving parts and this problem continues to be the Achilles heel of the rotary piston engine although Mazda would seem to have reduced this problem to manageable proportions. 1650 Otto von Guericke built a vacuum pump which employed leather washers to prevent leakage between cylinder and piston. 1782 James Watt who invented the steam engine?s connecting rod crank mechanism which made it possible to convert the piston?s reciprocating motion into rotary motion designed an oscillating piston machine in which a wing-shaped rotary blade performed an almost complete revolution uncovering inlet ports in a chamber separated off by a curved radial wall. [Fig 4] 1799 One of Watt?s co-workers, Murdock, adapted Pappenheim?s gear pump to create a rotary piston steam engine. [Fig 5] 1846 Elijah Galloway built the first rotary piston engine with inner epicycloid and enveloping outer line. [Fig 6] 1859 Jones, modified Pappenheim?s gear pump and produced a double rotor with only two teeth per gear. Rootes compressors and pumps employ this principle. [Fig 7] 1900 Alotham and Franchot designed a vane compressor comprising a bust rotating inside a cycloidal housing. [Fig 8] 1901 The American, Cooley, lodged a patent for a rotary piston engine with an internal epicycloid and enveloping outer chamber. [Fig 9] 1908 The Englishman, Umpleby, transformed Cooley?s steam engine into an internal combustion engine but experienced problems with gas tightness. [Fig 10] 1923 A Swedish patent was granted to Wallinder and Skoog in respect of a true rotary piston thermal engine with toothed meshing, enveloping interior hypocycloid and internal five pointed rotor with a 5:6 rotation ratio which could be used as either a two or four stroke internal combustion engine. [Fig 11] 1938 Sensaud and Lavaud, (the French engineers responsible for the Traction Avant automatic gearbox which was a failure) applied for a patent for a rotary piston engine with internally meshing gears in a hypocycloid housing and a 5:6 reduction ratio. Both Renault and Citroën, at the instigation of the French Air Ministry provided backing for this project and a number of engines were built at Batignolles. Unfortunately the engine failed to live up to expectations and the project was abandoned. [Fig 12] 1943 The Swiss manufacturer Bernard Maillard built an air compressor based on a British patent for a rotary piston machine with a 2:3 ratio and internal hypocycloid surfaced chambers. Leakage under pressure made it impossible to use this design as a thermal engine. [Fig 13]