Subject: Aluminum end housings status.
From: ACRE
Date: 5/2/2003, 4:03 PM


Just came away from a meeting with the aluminum end housing coalition.
IE. Foundry.. machine shop.. pattern maker.
They have come up with a very VERY good way of positively locking the
through
hardened steel wear surfaces into the aluminum castings. We are
all very excited about the prospect of a 150 pound rotary engine
putting out 250 HP and doing it with no fuel burn penalty.
Now if I can get 15 pounds out of a 3:1 gear box we
will have one heck of an aircraft engine.

Paul Lamar

OK Paul, now that you have our interest, what is that way of doing it.
Curious George (down under)

That I can't say. They may want to protect the idea with a patent.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.