Subject: 20b Throttle Bodies for sale
From: ACRE
Date: 5/6/2003, 7:19 AM


Chuck wrote:

Did find three suppliers of 4 inch
throttle bodies for the 20b.
These
are
105 mm each (4.17"). Accufab number
AB-F105TBOR, Holley has three,

and Edelbroke Universal racing #3877.
The Accufab appears to be
the smallest footprint and possibly the
lightest. Or am I missing
something?

Judging from a web search and until I
can spend more time in the
salvage yards, 105 mm throttle bodies
were never stock on any
engines. I would
like
to be wrong and save that cash for other
things.

Wade Bush
Flying 20b to be

They are simple to make Wade. Here is a
nice large one made by Chuck

Dunlap. You could also weld it up from
aluminum tubing and plate.
Most commercial ones are way more
complicated than needed in our
application.

Paul Lamar


wadebush wrote:

I was thinking that way (making my own) but
starting comparing
time-tools-experience-education-stock and
pieces-plan/instructions and

then decided to just buy one.  OK, I'll
bite, does Chuck have more and

how much for a four inch model? Wade


I built mine as an excersize to teach myself
machining on my new CC
(cheap chinese)mill and CC lathe.
It took about 20 hours to complete, not
economical to produce the way I
built it.
McMaster Carr shows aluminum butterfly valves,
the 4" model is $153.

http://www.mcmaster.com/catalog/109/html/0357.html#.
If it works, you might want add an idle
adjustment stop.

Chuck Dunlap

wadebush wrote:

Thanks Chuck!
Wade

Guys,  I've got a new 95mm  [3.7
"] Holly #112-513 throttle
body.  It does not have the spacer or tps which you
dont need.  I picked it up in a speed shop with an
inch of dust on the box. It looks almost exactly like
the one pictured that was made on the CCM. My camera
is lent out for a few days so no picture yet. I was
going to use it on my turbo 13b even though its
overkill. after considering hookup for the intercooler
it would be much simpler to use a 3" one.  If anyone
has a new 3" aftermarket tb we might arrange a swap
Let me know offline>  jimcoffmanus@yahoo.com


A quick Google search turned up this from Holley's website.
http://www.holley.com/HiOctn/ProdLine/Products/AMS/AMSTB/112-512.html
They show up to 105MM, one dealer is getting $600 for this.
Ouch!!

Chuck Dunlap

-wadebush wrote:

On a web search the Accufab 105 mm is 309.00 from "Proficient Performance"
and "FT Force".
Couldn't find a price for the Edelbrock # 3877 105mm.
The aluminum butterfly valve from Mc Master-Carr, found specs on another
site, is listed as 30 lbs. ??
Have emailed them on that weight. Could be all the lever stuff on the side.
By using parts off of my original throttle body I could fabricate a throttle
body but them it might be a waste of time if it doesn't come together or
work well.

Anyone buying twin turbos off of a 20bs????
Wade

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.