Paul
I just checked up on the Moeller site and see where Freedom
Motors
is
taking orders for their
engines.
"Beta versions of the RotapowerŪ 650 and 1300 will be available
this
summer and priced at $5,000
and $7,000, respectively. Volume pricing reductions will be
announced
as production levels
increase later this year. "
www.freedom-motors.com/
Thought I would pass this along to the group.
Mike Perry
What ever you do don't send them any money.
They have had the same message up for 3+ years. Paul Moller
recently
plead guilty to stock violations.
Hans Conser
"Bruce E. Calkins" wrote:
The Rotapower 650 announcement went up a few days ago. If you will
notice,
Freedom Motors had planned to put the 530cc engine into production
first,
but because of the interest received in the larger
displacement/horsepower
output engine the 650cc is being produced first.
Also, Dr. Moller did not "plead guilty" to anything. Rather than
go
into a
long battle with the SEC, he agreed to pay a fine.
-MI
I'll believe after I see it run for 500 hours Bruce. Its going to
take
you
years to overcome your image. Best change your company name and hide
the owner ship of the new company.
Paul Lamar
wadebush wrote:
Bruce,
Instead of being defensive about the engine why not put one of your
650cc
engine in an airplane and fly it around to all the shows
demonstrating
that
it works. Better yet, one of each.
After some real air time hours, people not wanting to "roll their
own" can
go "drop in" for their aircraft engines through you guys (Moeller /
Freedom
Motors).
Until then the only "proven" (real air time rotaries) are the ones
that
actually fly and are able to make it to the shows.
Paul has to be somewhat conservative especially on anything not
flown. To
tell
everyone "yes, go and buy one" would put him at odds with potential
lawsuits
and mad patrons should some unforeseen problem arise in the Freedom
motor.
The engine is different enough thats its reliability is yet unproven
especially without a flying example. Of course people would be
interested
but there will always be those that choose to pioneer their own way
or, as
in my case, save tons of money while learning a subject extremely
interesting to me.
Just my take on this, but I could be wrong.
Wade Bush
"Bruce E. Calkins" wrote:
Dear Wade,
We have been working with a group which intends to offer the engine
to the
aviation community and they, in turn, have been talking with a
aircraft
builder. My understanding is that they will be getting one of the
first 50
engines that come out of our partner's facility in Minnesota and that
it
will be modified and used in some sort of aircraft application. I
have not
been part of that discussion. We are concentrating on the engine
production
requirements and meeting specifications for a number of non-aviation
related
applications as our top priority.
Like Mr. Lamar, we do not suggest that one of the first applications
of this
engine be in an aircraft. We would prefer to establish a performance
history with a less safety-critical application. But we have little
control
of the engine once it is sold and, realizing this, when we were
approached
by the group mentioned above, we suggested that they run independent
tests
and do their own evaluation. Given the outcome is positive and the
"first
articles" coming out of our manufacturing effort are suitable for
their use
in an aircraft, they will proceed.
Again, we want our rotary engine to gain acceptance in a wide range of
applications and have been working steadily (although slowly) towards
that
goal since we acquired the OMC design in the mid-1980's. I know that
many
people have become frustrated with our apparent lack of progress, but
we
continued to work on both the 530 and 650 designs at our own expense.
Our
requirements lead us to look first at the 530, but other industries
needed
the additional horsepower of the 650 (50 hp vs. 75 hp, respectively).
We have slowly acquired all the specialized equipment needed to
produce the
engine in volume and built tooling for both the 530 and 650 engines,
with
custom tooling for the version required for our ducted fan
application.
Furthermore, we've been testing the engine in various configurations
in our
dyno facility nearly continuously for the past three years
(two-to-three
builds a week), and in a ducted fan test stand for about two years.
The
eight 530 engines in the Skycar have now been in used periodically
for about
2 years and in a more than 20 brief hover flights over the past year.
I appreciate that it has taken us a long time to bring the Rotapower
engine
to this point but I hope that we can get an unbiased appraisal of the
engine, regardless of how long it takes. As rotary engine
supporters, I
continue to think that this could be your goal as well.
Sincerely,
Bruce E. Calkins
General Manager
Moller International
(530) 756-5086
www.moller.com
Bruce, I think we all want you to succeed. However, over the years
people keep sending emails to the list announcing that they read on
your website that you are about to go into production with the motors,
and we haven't seen it yet despite it saying so on the website all
these years... So we are understandably skeptical.
I am curious as to just who is your partner in Minnesota, RotaMax, Inc?
Web searches don't find it listed anywhere except on your website.
The only snowmobile manufacturer I know of in Minnnesota that I know of
is Polaris, very conservative company, unlikely to put a wankel in
their machines.
Paul is right about the aviation market of course, at 75 HP you are
competing against very inexpensive two strokes...
Hans Conser
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.