> >>>>>>>> Paul
>>>>>>>>
>>>>>>>> I just checked up on the Moeller site and see where Freedom
>> Motors
>>> is
>>>>>>>> taking orders for their
>>>>>>>> engines.
>>>>>>>>
>>>>>>>> "Beta versions of the RotapowerŪ 650 and 1300 will be available
>>> this
>>>>>>>> summer and priced at $5,000
>>>>>>>> and $7,000, respectively. Volume pricing reductions will be
>>> announced
>>>>>>>> as production levels
>>>>>>>> increase later this year. "
>>>>>>>>
>>>>>>>> www.freedom-motors.com/
>>>>>>>>
>>>>>>>> Thought I would pass this along to the group.
>>>>>>>>
>>>>>>>> Mike Perry
>>
>>>>>>> What ever you do don't send them any money.
>>
>>>>>> They have had the same message up for 3+ years. Paul Moller
>> recently
>>>>>> plead guilty to stock violations.
>>>>>>
>>>>>> Hans Conser
>>
>>>> "Bruce E. Calkins" wrote:
>>>>>
>>>>> The Rotapower 650 announcement went up a few days ago. If you will
>>> notice,
>>>>> Freedom Motors had planned to put the 530cc engine into production
>>> first,
>>>>> but because of the interest received in the larger
>>> displacement/horsepower
>>>>> output engine the 650cc is being produced first.
>>>>>
>>>>> Also, Dr. Moller did not "plead guilty" to anything. Rather than
>>>>> go
>>> into a
>>>>> long battle with the SEC, he agreed to pay a fine.
>>>>>
>>>>> -MI
>>
>>>> I'll believe after I see it run for 500 hours Bruce. Its going to
>>>> take
>> you
>>>> years to overcome your image. Best change your company name and hide
>>>> the owner ship of the new company.
>>>>
>>>> Paul Lamar
>
>
>> wadebush wrote:
>>>
>>> Bruce,
>>> Instead of being defensive about the engine why not put one of your
>>> 650cc
>>> engine in an airplane and fly it around to all the shows
>>> demonstrating
>> that
>>> it works. Better yet, one of each.
>>> After some real air time hours, people not wanting to "roll their
>>> own" can
>>> go "drop in" for their aircraft engines through you guys (Moeller /
>> Freedom
>>> Motors).
>>> Until then the only "proven" (real air time rotaries) are the ones
>>> that
>>> actually fly and are able to make it to the shows.
>>
>>> Paul has to be somewhat conservative especially on anything not
>>> flown. To
>>> tell
>>> everyone "yes, go and buy one" would put him at odds with potential
>> lawsuits
>>> and mad patrons should some unforeseen problem arise in the Freedom
>>> motor.
>>> The engine is different enough thats its reliability is yet unproven
>>> especially without a flying example. Of course people would be
>>> interested
>>> but there will always be those that choose to pioneer their own way
>>> or, as
>>> in my case, save tons of money while learning a subject extremely
>>> interesting to me.
>>> Just my take on this, but I could be wrong.
>>>
>>> Wade Bush
>>
>
> "Bruce E. Calkins" wrote:
>>
>> Dear Wade,
>>
>> We have been working with a group which intends to offer the engine
>> to the
>> aviation community and they, in turn, have been talking with a
>> aircraft
>> builder. My understanding is that they will be getting one of the
>> first 50
>> engines that come out of our partner's facility in Minnesota and that
>> it
>> will be modified and used in some sort of aircraft application. I
>> have not
>> been part of that discussion. We are concentrating on the engine
>> production
>> requirements and meeting specifications for a number of non-aviation
>> related
>> applications as our top priority.
>>
>> Like Mr. Lamar, we do not suggest that one of the first applications
>> of this
>> engine be in an aircraft. We would prefer to establish a performance
>> history with a less safety-critical application. But we have little
>> control
>> of the engine once it is sold and, realizing this, when we were
>> approached
> >> by the group mentioned above, we suggested that they run independent
>> tests
>> and do their own evaluation. Given the outcome is positive and the
>> "first
>> articles" coming out of our manufacturing effort are suitable for
>> their use
>> in an aircraft, they will proceed.
>>
>> Again, we want our rotary engine to gain acceptance in a wide range of
>> applications and have been working steadily (although slowly) towards
>> that
>> goal since we acquired the OMC design in the mid-1980's. I know that
>> many
>> people have become frustrated with our apparent lack of progress, but
>> we
>> continued to work on both the 530 and 650 designs at our own expense.
>> Our
>> requirements lead us to look first at the 530, but other industries
>> needed
>> the additional horsepower of the 650 (50 hp vs. 75 hp, respectively).
>>
>> We have slowly acquired all the specialized equipment needed to
>> produce the
>> engine in volume and built tooling for both the 530 and 650 engines,
>> with
>> custom tooling for the version required for our ducted fan
>> application.
>> Furthermore, we've been testing the engine in various configurations
>> in our
>> dyno facility nearly continuously for the past three years
>> (two-to-three
>> builds a week), and in a ducted fan test stand for about two years.
>> The
>> eight 530 engines in the Skycar have now been in used periodically
>> for about
>> 2 years and in a more than 20 brief hover flights over the past year.
>>
>> I appreciate that it has taken us a long time to bring the Rotapower
>> engine
>> to this point but I hope that we can get an unbiased appraisal of the
>> engine, regardless of how long it takes. As rotary engine
>> supporters, I
>> continue to think that this could be your goal as well.
>>
>> Sincerely,
>>
>> Bruce E. Calkins
>> General Manager
>> Moller International
>> (530) 756-5086
>> www.moller.com
Bruce, I think we all want you to succeed. However, over the years
people keep sending emails to the list announcing that they read on
your website that you are about to go into production with the motors,
and we haven't seen it yet despite it saying so on the website all
these years... So we are understandably skeptical.
I am curious as to just who is your partner in Minnesota, RotaMax, Inc?
Web searches don't find it listed anywhere except on your website.
The only snowmobile manufacturer I know of in Minnnesota that I know of
is Polaris, very conservative company, unlikely to put a wankel in
their machines.
Paul is right about the aviation market of course, at 75 HP you are
competing against very inexpensive two strokes...
Hans Conser
They wont make it in the snowmobile world as most of them are
putting out 125 to 175 hp off the showroom floor and the freedom
motor costs dam near as much as the whole snowmobile.
Ken Welter
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.