In a nutshell, I think this summarizes the two gear sets we are
currently
looking at:
Real World Solution's current RD-1A & RD-1B:
Input : sun gear
Output = Ring Gear : Ratio = -2.17, (reverse of input.)
If Output = Planet carrier (not like RD-1A&B but like Ken Welter's Ross
drive): Ratio = +3.17 (same rotation as input)
Real World Solution's planned RD-1C
Input : Sun gear
Output : Planet carrier : Ratio = +2.85 (same rotation as input)
If Output = Ring gear (not like RD-1C) : Ratio = -1.85 (reverse of
input)
Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode
Mike,
Yep, that's right but to help simplify the understanding it's
RING GEAR divided by the SUN GEAR for same direction.
RING GEAR divided by the SUN GEAR ( + 1) for the opposite direction.
George (down under)
Without looking it up George that sounds about right from memory.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2003 All world wide rights reserved.