Tracy Crook wrote:

At long last the design of the 2.85 : 1 redrive (RD-1C) is complete.
Prototype testing is scheduled to begin in June and if all goes well,
production units will be available in August.

These are 6 pinion drives provisionally rated at 300 HP

continuous.  The

target engine for these drives is the RX-8 Renesis but also useful for

those

turning long props or running higher rpm on current 13B or 20B engines.

I currently have 2 confirmed orders for this drive.   To encourage more

2.85

:1 users to order now and help reduce production costs with higher

volume, I

am accepting deposits for the August production run at a $140 discount.
Regular price is $2840.00.  A $100 deposit will hold your

production slot.

If you already have one ordered you will get the reduced price.

If for any reason the tests on the drive are unsatisfactory, all

deposits

will be refunded.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

Great news Tracy, check's in the mail.

You had talked about hydraulic prop control provisions in the past.  Is
this still part of the design?

MGM

Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode

Mark Steitle wrote:

Tracy,
My deposit check is in the mail.
Thanks,
Mark Steitle
Austin, TX

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.