Subject: Very Inexpensive 6061 1 5/8" straight aluminum tubing
From: ACRE
Date: 5/15/2003, 2:32 PM


Ed Anderson wrote:

Paul, some of the list members might be interested in this.  I purchased 10
pieces for a total of  $9.95 of the tubing listed below from e bay:

You are bidding on 10 pieces of aluminum tubing, 1 5/8"(1.650) outside
diameter, 1 1/2(1.538) inside diameter, 1/16" (.055) wall thickness. Each
piece is approximately 15" long. Each tube has a smooth inside
diameter, and
the outside of the tubes has very fine ribs running the length of the tube.
These tubes have no heavy scratches or dings, pay a fraction of the retail
cost. Bid with confidence, check my feedbacks and other auctions. Buyer
pays
actual shipping, I accept Paypal and money orders and ship in the US. Good
Luck.

I received the below e mail informing me he had 100 more similar tubes if
anyone was interested.

"Hi Ed, the total for the 10 tubes comes to $16.42, $9.50 +
$6.92(shipping),
for Paypal, use:

patkelly66@aol.com

If your interested, I have 100 more of these tubes to sell, your cost would
be $0.85/each + shipping or $75.00 + shipping for all 100, let me know,
thanks.

Pat"

Pat  confirmed the tubing is 6061, so the price is certainly right if anyon
can use that type of tubing.

Ed Anderson

Ed Anderson
Matthews, NC
RV-6A N494BW
eanderson@carolina.rr.com

Might be almost right for water plumbing. Automotive water plumbing hose
is  1 1/2 and 1 1/34 ID. If you have a lathe you could turn some reducers
and tig weld or braze them on. I wonder how it would bend. Benders don't
usually have mandrels for 1 5/8 OD.

Paul Lamar

He also has 1-3/4" pieces for about a 1.10 ea.

Mark S.


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2003 All world wide rights reserved.